Platinum

QualityUltra Smooth Surface
Min Details0.1mm
Minimum wall Thickness0.8mm
Maximum Size89x89x100mm
Heat Resistance800°C
ColorPlatinum

"Our solid Platinum has a bright silver-white color. It goes through extensive hand-polishing to give it a smooth, shiny finish.
Platinum consists of 95% Platinum, 5% Ruthenium
Please note that while we do verify the metal content of our gold products, individual pieces are not tested by an assay office or governmental agency.
When we hand-polish your Platinum model, some material will inherently be worn off. Please note that the volume of your finished product may be up to 10% less than the original model due to shrinkage and polishing loss."

Platinum can be maintained with most non-abrasive cleaners. Avoid exposing to household bleach, which can cause corrosion and discoloration.

"Platinum models are 3D printed using a complex five-step process. First, the model is printed in wax using a specialized high-resolution 3D printer. It is then put in a container where liquid plaster is poured in around it. When the plaster sets, the wax is melted out in a furnace, and the remaining plaster becomes the mold.
Molten Platinum is poured into this mold and set to harden. The plaster is broken away, revealing your new product. The product is then carefully cleaned and hand-polished to give it the trademark Platinum luster. Please be aware that polishing can wear down or fill in very fine details and edges. Polishing also removes a bit of material from your product in order to smooth it out, so the exact volume may be slightly smaller than that of your digital model."

Click to Call
Download AR Brochure PDF