Our Locations : Melbourne | Brisbane | Perth | Sydney

Receive a FREE quote

Porcelain, Ceramic


Cleaning excess powder from the 3D written molds is our biggest limitation in producing ceramic ware. The mould is associate degree inverse of the merchandise itself, wherever solids of the merchandise square measure empty house. optical maser sintering the mould leaves its interior jam-packed with loose powder. we tend to rigorously blow it out with compressed gas through the flat base of the model, however tight cavities removed from the bottom gap square measure laborious or not possible to scrub. this suggests that models that square measure advanced and have multiple holes in walls or long wires become progressively laborious to print. If you wish to troubleshoot, attempt creating the model solid and supported one "core".

Because of the molding method, some surfaces could contain seam lines and marks from the funnel. we tend to do our greatest to repair the surface of the model however as a result of this can be done manually there could also be some trace memory of those marks left on the surface.


Surface and Glazing:-

Glazes square measure quite simply pigments, they're coloured glass being other to the surface of model. attributable to this, every glaze behaves otherwise and can yield totally different results. Glazes could vary in thickness betting on the pure mathematics, this might embrace dripping and ripples. ceramic ware tends to chip once terribly skinny and glazes are additional skinny on sharp edges, therefore we tend to advocate misestimation off all edges.

Matte Black, Gloss Black, Gloss White, and Gloss Red press on the surface of the model during a consistent, opaque tone. tiny details could also be reduced because of the thickness of the glaze.

Gloss Celadon inexperienced, Gloss Oribe inexperienced, Gloss atomic number 27 Blue, and Gloss Blue square measure additional semitransparent and edges could break, inflicting adorned  detail to look whiter and carved  details to be a deeper color. attributable to however the glazes travel the surface throughout firing the thickness of the glaze could vary supported the pure mathematics.



Minimum Details
1.00 mm
Minimum wall Thickness
50.00 mm
Maximum Size
125 × 125 × 200 mm mm
Heat Resistance
0.00 °C