|Quality||Ultra Smooth Surface|
|Minimum wall Thickness||0.8mm|
All Gold products go through extensive hand-polishing to give them a smooth, shiny finish. 14k Gold has a subtle, warm coloring, while 18k Gold is brighter and more vibrant. 14k Rose Gold has a pinkish tint, and 14k White Gold looks like silver with a hint of gold. 14k Gold consists of 58% Gold, 31% Copper, 10% Silver, and 1% Zinc. 14k Rose Gold consists of 58% Gold, 40% Copper, 1% Silver, and 1% Zinc. 14k White Gold consists of 58% Gold, 24% Copper, 9% Zinc, and 9% Nickel.
Gold can be maintained with most non-abrasive cleaners. Avoid exposing to household bleach, which can cause corrosion and discoloration.
"Gold models are 3D printed using a complex five-step process. First, the model is printed in wax using a specialized high-resolution 3D printer. It is then put in a container where liquid plaster is poured in around it. When the plaster sets, the wax is melted out in a furnace, and the remaining plaster becomes the mold. Molten Gold is poured into this mold and set to harden. The plaster is broken away, revealing your new product. The product is then carefully cleaned and hand-polished to give it the trademark Gold luster. Please be aware that polishing can wear down or fill in very fine details and edges. Polishing also removes a bit of material from your product in order to smooth it out, so the exact volume may be slightly smaller than that of your digital model."